Unlike other shade shifting wrap vinyl brands, Orafol Shift Effects colors are non-directional in appearance. It is okay to alternate between lengthwise and widthwise panel installation
Caution: Always pre-test vinyl installation on vehicles. Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle.
Warning: During installation it is critical to prevent “dragging” the adhesive side of wrap vinyls over edges and flat surfaces. Abrasion caused by dragging can result in “adhesive dots” or “sanding” under the surface of the vinyl and make it appear to have many small bumps. This is usually not repairable. For more information and installation advice, please view the video below titled “Avoid Dots/Adhesive lines”.
Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. We are unable to guarantee consistency with multiple orders of cut yardage.
The ORAFOL warranty is for product value only and provides no protection or reimbursement for additional costs including labor or vehicle/paint damage. Please refer to the Information Sheets below.
Top image is Avery SW900 Color Flow Satin Rushing Riptide showing directional flow.
Bottom image is ORACAL 970RA Shift Effect Aubergine/Bronze showing non-directional flow.
Shade Shifting Colors are the latest trend in colorchange wraps. The colors change in appearance, depending on the viewing angle, which results in a unique and dramatic effect. Some shade shift brands are directional, therefore, you should install them consistently in the same direction for optimal results. Both 3M ColorFlip and Avery ColorFlow wrap vinyl colors are directional. ORAFOL shift Effect wrap vinyl colors are NON directional, so they can be installed in any direction.