Mactac StreetRap

  • MSTREETWRAP(54)(50, 100 or 150)

    MSTREETWRAP(54)(50, 100 or 150)


    Email us your photos to


NOTE: 50 yd orders contain two 25 yd rolls

  • 3.4 matte white PVC film with an aggressive, permanent, blended acrylic/rubber adhesive.
  • Bonds well to flat or slightly rough, pedestrian traffic surfaces like concrete, asphalt and perfect for textured concrete pillars and walls
  • 3 month outdoor durability for pedestrian traffic
  • Not designed for areas under vehicle traffic
  • Layflat polycoated liner
  • Not recommended for sealed concrete
  • When used as an exterior floor graphic StreetRAP™ must be laminated with Permacolor® FloorGRIP™ PF6600, which exceeds ANSI/NFSI B101.3 & B101.1 specifications for a “High Traction” surface.
  • Removable on unsealed concrete
  • Print Compatibility: Solvent, Eco-Solvent, UV, Latex and Screen Print
  • For profiles, go to

Products listed on this page can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to

Mactac StreetRAP 2017 Testimonial

“TPM Color Lab prefers the Mactac StreetRap aggressive adhesive when applying to smooth unfinished concrete surfaces which can be challenging.    This film prints well on our Latex printers  and when the 3.2 mil film is installed properly the result is a quality application that our customers have confidence in.”


Dustin Batson
TPM Color Lab
Greenville, SC

MACtac StreetRAP 2016 Testimonial

“Snow Signs and Krazy Wraps prefers Mactac StreetWrap when it comes to creating vibrant concrete or asphalt graphics that impress and last!  Mactac’s StreetWrap is very easy to apply and the agresive solvent acrylic adhesive provides outstanding adhesion!”


Jocelin Snow
Snow Signs/Krazy Wraps
Salina, CA

For a more permanent concrete wrap, it's important to apply concrete primer/sealer/concrete paint (available at Home Depot) prior to installing your concrete vinyl. Complete the wrap by sealing the edges with 2-part epoxy and cutting back any seams to prevent water damage to your wrap.

"Before installing StreetRap, use a fine bristle brush to remove any dirt from the rough concrete or asphalt. The surface needs to be dry and above 50 degrees F to allow the adhesive to bond well."

StreetRap Testimonial - 2018

“Printedge uses Mactac StreetRap for more than just  great floor graphics.  I’ve had great success using StreetRap on concrete block and brick for our Environmental Graphic installations. When the designers want graphics with fine detail installed on painted textured accent walls, I have found that MacTac StreetRap never fails to stay where I stick it, unlike other interior wall vinyls which will pull up on the edges.”


Travis Young
Printedge Environmental Graphics
Knoxville, TN


Sorry, there were no results for “{{ searchstring }}”