Avery Dennison MPI 2050 Permanent Adhesive 3.4 Mil 5yr

  • A2050(SIZE)(75 or 150)

    A2050(SIZE)(75 or 150)


    Email us your photos to Gallery@fellers.com

    Products listed on this page can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov



NOTE: 50 yd orders contain two 25 yd rolls


  • 3.4 mil calendered matte white translucent film with a clear permanent acrylic adhesive
  • Designed for backlit applications, great for airports, restaurants, subways, bus shelters, trade shows and more
  • 5 year outdoor durability
  • Formerly named MPI 2150
  • Polyethylene coated 90lb StaFlat® liner
  • Print Compatibility: Solvent, Eco-Solvent, UV Curable, Latex and Screen Print
  • For profiles, go to : http://avery-us.color-base.com/add_system.php

Translucent Tips and Tricks

"Many customers "double strike" their translucent material to help the image from becoming "washed out" when the material is lit. On light boxes with very bright bulbs (typically when the box is very high off the ground) you can print the image on clear vinyl, and apply the same image directly on top of it, printed on white translucent, for the greatest "pop" from the colors. If you are using a clear substrate, and getting "hot spots" of light, try adding diffuser film to the back of the substrate. It will help even out the light diffusion and give you a more even tone."


Sorry, there were no results for “{{ searchstring }}”