3M™ IJ63-20 Changeable Adhesive 3.2 Mil 1yr

  • 3MIJ6354150



    Email us your photos to Gallery@fellers.com

    Products listed on this page can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov



NOTE: 50 yd orders contain two 25 yd rolls

  • 3.2 calendered matte white Scotchcal translucent graphic film with a clear changeable adhesive 
  • Ideal for short-term backlit and window applications, indoor and outdoor promotional graphics and taxi tops
  • Up to 1 year expected outdoor performance life
  • Adheres to multiple substrates
  • Removes easily without heat, leaving little or no residue
  • Polycoated layflat paper liner
  • 3M suggests laminating with 8508 or 8509
  • Print Compatibility: Solvent, Eco-Solvent, UV, Latex and Screen Print
  • For profiles: 3M Graphic Solutions - Color / ICC Profiles

Translucent Tips and Tricks

"Many customers "double strike" their translucent material to help the image from becoming "washed out" when the material is lit. On light boxes with very bright bulbs (typically when the box is very high off the ground) you can print the image on clear vinyl, and apply the same image directly on top of it, printed on white translucent, for the greatest "pop" from the colors. If you are using a clear substrate, and getting "hot spots" of light, try adding diffuser film to the back of the substrate. It will help even out the light diffusion and give you a more even tone."


Sorry, there were no results for “{{ searchstring }}”