Solvex 70/30

  • Solvex 70/30 Hole Pattern

    SELECTED
  • Solvex 70/30 Hole Pattern UV/Latex printable

    SELECTED

GALLERY

Email us your photos to Gallery@fellers.com
ADD TO CART


PRODUCT DETAILS

NOTE: 50 yd orders contain two 25 yd rolls

Solvex Perf

  • 6 mil PVC 70/30 Perforated window film
  • 1 year durability
  • Graphics are visible from the outside, see thru from the inside
  • White perforated PVC film with clear acrylic adhesive and black back
  • For Solvent and Eco Solvent printing.  UV/Latex printable available in special 54" x 164ft product only.
  • For profiles, we recommend using one from Clear Focus website:http://www.clearfocus.com/tech_support/printing/icc_profiles.php

UV/Latex Printable

  • Graphics are visible from the outside, see thru from the inside
  • Unique 3-layer paper liner construction increases the depth of the perforated hole to hold excess UV or Latex ink so that the ink does not plug the holes
  • 2-layer vinyl construction:  3 mil white and 3 mil black for a total of 6 mil
  • White perforated PVC film with clear acrylic adhesive and black back
  • Available in 50/50 or 70/30 perforation pattern
  • 1 year durability
  • Print Compatibility: UV and Latex
  • For profiles, we recommend using one from Clear Focus website:http://www.clearfocus.com/tech_support/printing/icc_profiles.php

 




Putting the finishing touch on your vehicle wrap

"If you're looking for the ultimate finishing touch for a vehicle wrap, don't forget to print window perf with your killer design and install over the headlights and tail lights. It looks cool on, and doesn't alter brightness levels too much when the lights are on. Be sure to check the laws for your state before applying."

What's The Difference Between Perforation Patterns?

 

 

 

Should You Overlaminate Window Perf?

"If you want optimal protection for fading and scuff resistance then you must use optically clear vinyl overlaminate. However, if you want the utmost visibility through the perforated window film, then you can't vinyl overlaminate. In this case an aerosol spray overlaminate could be used prior to install and make sure that liquid does not plug up the perforations. Please note that if you do NOT use vinyl overlaminate it is very difficult to see through the perforated window vinyl when driving in the rain.

Do NOT Use Windex Before Wrapping!

"Ammonia based products, such as Windex, prevent the adhesive in window mounting adhesives from sticking to the glass. Instead use soap water, Rapid Prep, or alcohol to prep the surface."

Is The Glass Ready To Wrap?

"When installing window perf or other vinyl, many glass surfaces have wax or other invisible coatings on them (like RainX) that interfere with adhesion. Place several drops of water on the glass, if the water forms into beads there is a coating that must be removed. If the water does not form into beads there is no coating and you can proceed to clean with isopropyl alcohol."