3M™ Fasara 50" Interior Design Polyester Films

  • 3MFASARA*50

    3MFASARA*50

    SELECT A COLOR

    • Milano (Milky White)

    • Sagano

    • Lausanne

    • Matte Crystal

    • Oslo

    • San Marino (Milky Milky)

    • Fine Crystal

    SELECTED

    GALLERY

    3M Fasara Milky White. Photo courtesy of 3M USA.
    Email us your photos to Gallery@fellers.com
    SELECTED
    SELECTED

    Products listed on this page can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

ADD TO CART


PRODUCT DETAILS

NOTE: 50 yd orders contain two 25 yd rolls
  • At a fraction of the cost of etched-glass, Fasara films are perfectly suited for interior glass partitions or the inside surface of windows. Available in several textures, Fasara films can be used to create a more private atmosphere or a more dynamic aesthetic.
  • NOTE: Not designed for solvent inkjet printing
  • Milano is called 'Milky White' and San Marino is called 'Milky Milky' in Japan
  • Fine Crystal is 3.5 mil
  • Matte Crystal is 5.0 mil
  • Milano is 2.75 mil
  • Sagano is 3.0 mil
  • Yamato is 3.0 mil
  • Lausanne is 4. mil
  • Oslo is 4 mil
  • San Marino is 3.0 mil
  • Sabrina is 3.0 mil
  • Opaque Black 3.0 mil
  • Mare 3.0 mil
  • Illumina Black 3.0 mil

DEMONSTRATION VIDEO





Use Care Removing Vinyl from Glass

"Normal vinyl removal techniques are not generally appropriate when removing frosted vinyl from glass. Applying heat can cause the glass to crack or shatter. Using a solution of water and dish soap, saturate the vinyl with a fine mist, then cover with bubble wrap or plastic for two hours to prevent drying. The mixture of soap and water will penetrate through the vinyl and make removal much easier, without using heat."

close

Sorry, there were no results for “{{ searchstring }}”