Fellers customers have proven use of this vinyl on brake calipers but it is not warranted by Orafol
Designed for vehicle graphics, curved surfaces, rivets
Solvent polyacrylate, permanent adhesive, removable with heat
Do not wet apply
7 year outdoor durability
89lb PE-coated silicone paper
Meets or exceeds Federal Specifications ASTM D 4956
Caution: Always pre-test vinyl installation on vehicles. Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle.
Warning: During installation it is critical to prevent “dragging” the adhesive side of wrap vinyls over edges and flat surfaces. Abrasion caused by dragging can result in “adhesive dots” or “sanding” under the surface of the vinyl and make it appear to have many small bumps. This is usually not repairable. For more information and installation advice, please view the video below titled “Avoid Dots/Adhesive lines”.
Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. We are unable to guarantee consistency with multiple orders of cut yardage.
The ORAFOL warranty is for product value only and provides no protection or reimbursement for additional costs including labor or vehicle/paint damage. Please refer to the Information Sheets below.
Use Reflective Vinyl to Cover Holes Before Wrapping
"Use reflective film underneath your wraps. It's very strong and resists cold weather, so it can be used to support vinyl wraps that have been spanned over concave areas or holes where emblems have been removed."