60" wide, 3.2 Mil cast wrap vinyl with built-in protective clear coat layer with EZ apply/air egress and RS/slideability
No overlaminate required
Superior conformability over curved surfaces, corrugations and rivets
Easy Apply RS feature allows for faster positioning, bubble free application and long term removability
Gloss colors can sometimes have a haze/blotchiness/mottling that can usually be eliminated with heat. Even the shipping box can create surface impressions that can also be eliminated with heat
Avery Gloss black & white have an expected outdoor life of 12 years with limited warranty
Avery Gloss colors have an expected outdoor life of 10 years with limited warranty
Avery Metallic and Pearlescent colors have an expected outdoor life of 5 years with limited warranty
Avery Brushed Metal colors have an expected outdoor life of 4 years with limited warranty
Avery SW ColorFlow (Shade Shifting) colors have an expected outdoor life of 4 years with limited warranty
Avery Diamond colors have an expected outdoor life of 3 years with limited warranty
2 year outdoor durability horizontal
Clean removability up to 4 years
Colors with an asterisk* may be less than fully opaque and may demonstrate color shift when applied, or allow show through of paint lines or dissimilar colors, or overlap of material
Caution: Always pre-test vinyl installation on vehicles. Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle.
Warning: During installation it is critical to prevent “dragging” the adhesive side of wrap vinyls over edges and flat surfaces. Abrasion caused by dragging can result in “adhesive dots” or “sanding” under the surface of the vinyl and make it appear to have many small bumps. This is usually not repairable. For more information and installation advice, please view the video below titled “Avoid Dots/Adhesive lines”.
Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. We are unable to guarantee consistency with multiple orders of cut yardage.
The Avery Dennison warranty is for product value only and provides no protection or reimbursement for additional costs including labor or vehicle/paint damage. Please refer to the Information Sheets below.
When asked to do full color change wraps, I always suggest to the customer to pick an Avery Supreme color. The low-tac adhesive allows me to get the vinyl into position easily, helping speed up installation. The backing paper comes off with very little effort as well; you’re not fighting it like you do with the competition. I can often install complex areas with little or no heat, preventing over stretching, which is a major cause of wrap failures. To be able to apply a film that is naturally very pliable right out of the box makes for a quicker, mistake free, installation. I’ve wrapped hundreds of cars in Avery Supreme, it is my go to choice for color changes.”