NOTE: 50 yd orders contain two 25 yd rolls
- 3.5 Mil Cast Film with Long-term, Gray, Removable, Repositionable, Pressure Activated Adhesive with Non-visible Air Release Channels
- 5 year expected outdoor performance, 3 year vertical and 1 year horizontal warranty period
- The opacity of these films vary and should be considered when installing
- Available in 60" rolls, allowing most vehicles to be wrapped without seams
- Invisible air release channels assure fast and easy virtually bubble-free applications
- No overlaminate required
- Watercraft graphics applied above static water line only
- Note: Textured, metallic, pearl, and color flip films may have a directional characteristic in their appearance. For the best overall appearance, do not alternate between lengthwise and widthwise graphic panels.
- Caution: Always pre-test vinyl installation on vehicles. Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle.
- Warning: During installation it is critical to prevent “dragging” the adhesive side of wrap vinyls over edges and flat surfaces. Abrasion caused by dragging can result in “adhesive dots” or “sanding” under the surface of the vinyl and make it appear to have many small bumps. This is usually not repairable. For more information and installation advice, please view the video below titled “Avoid Dots/Adhesive lines”.
- Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. We are unable to guarantee consistency with multiple orders of cut feet/yardage.
- The 3M warranty is for product value only and provides no protection or reimbursement for additional costs including labor or vehicle/paint damage. Please refer to the Information Sheets below.