ClearFocus CurvaLam 2 Mil 2yr




    Email us your photos to

    Products listed on this page can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to



NOTE: 50 yd orders contain two 25 yd rolls

  • 2 Mil Optically Clear Cast PVC Cold Overlaminate
  • Designed for vehicle graphics and other outdoor applications on flat, curved or riveted surfaces
  • Outstanding conformability to prevent tunneling, wrinkling and cracking
  • Ultra-clear permanent, solvent acrylic, pressure-sensitive adhesive with clear polyester release liner
  • Prevents dirt and water from collecting in the perforated window film's holes
  • Additional UV protection to help resist color fade caused by UV rays
  • 2 year outdoor and 5 year indoor durability

Using 3M Scotch tape with over laminate films.

"Separating the clear release liner from the overlaminate can be challenging. Try sticking a piece of 3M Scotch tape in the corner of the face and back of the overlaminate. Pull both pieces of tape away at the same time. This should allow you to separate the overlaminate from the liner so you can get things started."

Should You Overlaminate Window Perf?

"If you want optimal protection for fading and scuff resistance then you must use optically clear vinyl overlaminate. However, if you want the utmost visibility through the perforated window film, then you can't vinyl overlaminate. In this case an aerosol spray overlaminate could be used prior to install and make sure that liquid does not plug up the perforations. Please note that if you do NOT use vinyl overlaminate it is very difficult to see through the perforated window vinyl when driving in the rain.


Sorry, there were no results for “{{ searchstring }}”