3M™ Envision™ SV480mC with Controltac & Comply with Micro Technology for Solvent & Eco-Solvent

  • 3M480MCSV(SIZE)150



    Email us your photos to Gallery@fellers.com

Paired Products


NOTE: 50 yd orders contain two 25 yd rolls

  • 2 Mil Lister White Non-PVC, Phthalate-Free non PVC film with grey opaque, removable adhesive featuring ControlTac (pressure-activated adhesive for easy sliding and repositioning) and Comply with micro technology adhesive channel system (superior non-visible air release channel system for fast, easy, bubble-free installations) for improved slideability
  • Designed for vehcile wraps, watercraft, railroad cars, trailers, textured wall surfaces, and outdoor signage
  • 11 year expected outdoor performance; 7 year vertical and 2 year horizontal warranty period
  • Great conformability and lifting resistance - stretch 150% without primer or relief cuts
  • Initial tack and slideability optimized for wraps
  • Installs well in both hot and cold temperatures
  • Designed for use with Solvent and Eco-Solvent Printers
  • Caution:  Always pre-test vinyl installation on vehicles.  Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle
  • Contains no added chlorine or halogens.  Made in part from bio-based materials and manufactured using 60% less solvent
  • 3M™ suggests laminating with 8418G, 8518, 8519, 8520, 8528, 8548G, 8549L, 8550M or 8915
  • Profiles: click here!

Products listed on this page can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

3M SV480mC Testimonial - 2019

“3M Envision SV480mC is the inkjet media of choice for every wall wrap that we produce and install. The conformability and superior adhesion work every time and in every situation that we have come across, from covering textured sheetrock to painted brick and cinderblock. Brick and cinderblock can be very time consuming, but the conformability and adhesion of this product allow for much more efficient installs than other print media we have used in the past. We are specifically happy with the Sustainability Edge feature of this print media which cuts out repeat trips to repair lifting edges. If you do a lot of wall wraps, we strongly recommend this product.”


Cody Stearman & Price Lavender COO/CFO
Digital Effects Signs & Graphics LLC
Nash, TX


Sorry, there were no results for “{{ searchstring }}”