3M™ IJ175Cv3 with Controltac, Comply and no visible air channels, 2 Mil 10yr

  • 3MV3IJ175C(Parent)

    3MV3IJ175C(Parent)

    GALLERY

    Email us your photos to Gallery@fellers.com
    SELECTED

    Products listed on this page can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

ADD TO CART


PRODUCT DETAILS

NOTE: 50 yd orders contain two 25 yd rolls

  • 2 Mil Cast vinyl with grey opaque, removable adhesive featuring ControlTac™ (pressure-activated adhesive for easy sliding and repositioning) and Comply™ adhesive channel system (superior non-visible air release channel system for fast, easy, bubble-free installations) and excellent slideability
  • Lower initial tack when compared with IJ180Cv3 and IJ180mC-10
  • Lesser removal capabilities when compared to film IJ180Cv3 and IJ180mC-10 and may leave more than 30% adhesive residue
  • Great for vehicle, fleet, and marine applications as well as long-term indoor and outdoor signage
  • 10 year expected outdoor performance
  • Great conformability and lifting resistance - stretch 130% with no primer or lifting
  • Polyethylene-coated paper liner
  • 3M™ suggests laminating with 8418G, 8518, 8519, 8520, 8528, 8548G, 8549L or 8900
  • Caution:  Always pre-test vinyl installation on vehicles.  Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle
  • Print Compatibility: Solvent, Eco-Solvent, UV, Latex



3M IJ175Cv3 Testimonial - 2019

Our preferred print media for the daily Vehicle & Boat wrap projects is the new 3M IJ175Cv3. The latest technology is far superior than the IJ180Cv3 when it comes to installation, performance and quality. The installation is much easier to attack a project as a solo installer or for a faster installation with a team of installers. The performance of the new 3M IJ175Cv3 is outstanding when bonding to complex curves, deep recessed channels etc. The bond strength can do well on its own with proper post heating and without glue additives. Printing on the IJ175Cv3 makes life much easier, it holds clarity, dries evenly and is consistent. The combination of a user friendly installation and performance helps creates the quality of a finished product. IJ175Cv3 is definitely a product you can trust time and time again! Thank you 3M for producing an amazing product!

 

Kristin Lanzarone-Scribner
WrapStar Pro
Citrus Heights, CA

close

Sorry, there were no results for “{{ searchstring }}”