3M™ IJ180mC-120 Printable Metallic Satin White Aluminum

  • 3MIJ180MC120(Parent)

    3MIJ180MC120(Parent)

    GALLERY

    Email us your photos to Gallery@fellers.com
    SELECTED
ADD TO CART


PRODUCT DETAILS

NOTE: 50 yd orders contain two 25 yd rolls

  • 54" or 60" wide, 2 Mil Cast Satin White Aluminum vinyl with grey opaque, removable adhesive featuring ControlTac (pressure-activated adhesive for easy sliding and repositioning) and Comply with micro technology adhesive channel system (superior non-visible air release channel system for fast, easy, bubble-free installations) for improved slideability
  • Gives vehicles a high-tech, attention grabbing finish
  • Great conformability and lifting resistance - stretch 130% with no primer or lifting
  • Polyethylene-coated paper liner
  • 3M suggests laminating with 8518, 8519, 8520, 8528, 8548G, 8549L or 8915
  • Caution:  Always pre-test vinyl installation on vehicles.  Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle​.
  • Warning:  During installation it is critical to prevent “dragging” the adhesive side of wrap vinyls over edges and flat surfaces.  Abrasion caused by dragging can result in “adhesive dots” or “sanding” under the surface of the vinyl and make it appear to have many small bumps.  This is usually not repairable.  For more information and installation advice, please view the video below titled “Avoid Dots/Adhesive lines”.
  • Print Compatibility: Solvent, Eco-Solvent, UV, Latex
  • For profiles: 3M Graphic Solutions - Color / ICC Profiles
  • The 3M warranty is for product value only and provides no protection or reimbursement for additional costs including labor or vehicle/paint damage.  Please refer to the Information Sheets below.

DEMONSTRATION VIDEO





close

Sorry, there were no results for “{{ searchstring }}”