BannerFlex Airow Engineered Pole Banner Kits



NOTE: 50 yd orders contain two 25 yd rolls

  • The only pole banner kit warranted for 10 years! The revolutionary Airow system uses a specially shaped fiberglass rod to achieve a significant reduction in wind force when compared to other bracket systems. The Airow system reduces wind load on the mounting pole without mechanical parts that will age and wear.
  • Engineered eccentrically tapered arms flex to dissipate up to two-and-a-half times more wind force than other pole banner kits.
  • When the banner is installed, arms put banner in tension to transfer wind force to fiberglass. Flexibility of the arms allows banner to return to original position when wind subsides.
  • Unique bracket design allows the arm to be removed without removing the bracket which is unlike other pole banner kits (see photo in Gallery)
  • With the proper banding/strapping the Airow system is warranted up to 10 years against breakage caused by wind up to 70 mph. Band-It Banding may be required in some installations (see Frank Tip below)
  • Visit for a wind force calculator
  • Airow Pole Kits Include: Main banner assembly mounting, two banner arms or brackets to display one banner, one at the top and one at the bottom. Includes four 40" stainless steel 5/8" bands in aluminum mil finish, and zip ties.
  • Included 5/8" bands are almost twice as strong compared to other pole kits that have 9/16" bands
  • For Double Banner Applications Please order two Airow pole kits. This will give you the necessary components to display two banners on one pole.


How to Make Your Own Pole Pockets Without Sewing

"Use 3M 4941 VHB Tape, Orabond 1397PP Premier, Avery AFB 6111G or BannerUps Pole Tape to make pole-pocket banners without sewing or heat-welding."

Direct Order Bands for Square Poles:

Direct Order Bands for Square Poles: Regular bands are tensioned by hand and can only get so tight. If the bands are not tight, the brackets and bands will move from wind force. This is fine on round poles because there are no corners. That movement on square poles will eventually because the bands to weaken and break on the corners. That is why we recommend direct ordering the Band-it Tool and matching bands for square poles. The Band-it Tool has the capability to tension bands over 2400 lbs. When ordering you must provide dimensions for the pole for correct band length.